Slipping gears, delayed Drive or Reverse, or a gearbox warning? Mechanics offers transmission inspection, servicing, repairs, rebuilds and replacement. Compare the repair budgets below, then share your car details for a written quote.
A routine service and an internal rebuild are very different jobs. These published Dubai estimates offer a starting point for planning. Mechanics confirms the actual work and price for your vehicle.
| Work | Budget per vehicle including 5% VAT | Scope to compare in the quote |
|---|---|---|
| Initial inspection at Mechanics | Free | Initial assessment. An extended scan, pressure testing, dismantling or other diagnostic work is quoted separately if needed. |
| Fluid and filter service | AED 262.50–630 | The advertised service category. Confirm the fluid specification and quantity, filter or pan, labour and level-setting procedure. |
| Solenoid or sensor replacement | AED 420–1,260 | Repair of the identified component. Confirm access labour, fluid, seals and setup, and whether these are included. |
| Valve body or mechatronic repair | AED 2,100–5,775 | The control assembly repair. Replacement units, clutch work, coding and adaptations can change the total. |
| Torque converter replacement | AED 1,575–4,200 | The advertised replacement category. Check removal and refitting, converter source, fluid and associated cooler work. |
| Full transmission rebuild | AED 5,250–12,600 | Internal overhaul. Confirm included internal parts, removal and refitting, fluid, converter work and final testing. |
| Replacement gearbox or specialist CVT and dual-clutch work | Vehicle-specific quote | Unit code, new or used condition, availability, installation, electronics and warranty determine the price. |
Repair figures are third-party advertised planning estimates checked on 10 October 2026, with 5% VAT added to explicitly pre-VAT figures. They are not confirmed Mechanics tariffs or a market average. Advertised inclusions are not itemised consistently, so the listed scope must be checked in your quote. Premium gearboxes can cost more. Your itemised total should show parts, fluid, labour, additional diagnosis and VAT.
The useful question is what has failed and what remains serviceable. A gearbox warning alone does not justify replacing the complete unit.
Your model, year, engine and VIN help identify the actual unit. Different transmissions within the same brand can need different fluids, service parts and repair procedures.
These dual-clutch transmissions can have wet or dry clutches, with different service requirements. Low-speed judder, clutch wear and control faults need to be distinguished before selecting work.
A clutch pack, hydraulic control assembly and software setup are separate considerations. Ask what testing supports a mechatronic repair and which adaptations are required afterwards.
The eight-speed 8HP family uses a torque converter. A fluid service, valve body repair, converter problem and internal clutch wear are different jobs, even when the driver reports similar symptoms.
ZF guidance requires the correct fluid, service components and temperature-dependent level procedure. The installed variant decides the specification rather than the number of gears alone.
A belt or chain CVT uses variable pulleys rather than the stepped gear changes of a conventional automatic. Pressure control, valve body faults and belt or pulley damage can require different repairs.
Use the specified CVT fluid. A hybrid system marketed as an e-CVT can have a different design, so it should not automatically receive the same diagnosis or fluid service.
These seven-speed and nine-speed automatics have variant-specific service and electronic requirements. Identify the installed unit before choosing a fluid, filter, pan or control component.
A shifting complaint may involve hydraulic operation, electronics or internal wear. Replacement electronics can require vehicle-specific setup, with that work confirmed in the estimate.
Tell us whether the fault appears cold, once warm, in one gear or when selecting Drive or Reverse. That detail helps make the checks relevant.
Vibration and clunks can also involve mounts or the wider drivetrain. If inspection points to a drive shaft fault or an AWD transfer case problem, that work is assessed separately from the gearbox.
The symptom guides the assessment. It is not a diagnosis or a guaranteed repair price.
Revs rising without the expected acceleration, or a long pause before Drive or Reverse engages, needs investigation. Tell us if the behaviour changes as the car warms up. Avoid repeatedly revving to force engagement.
Record the speed, gear and driving condition where it occurs. A shift-related jolt, take-off judder and motorway vibration can have different causes. Do not make recordings while driving or stand near moving components.
Share a photo of the message and describe any loss of drive. A restricted operating mode needs proper diagnosis. Clearing codes or disconnecting the battery does not repair the cause and can remove useful fault information.
Loss of drive, overheating or a substantial fluid leak means you should stop safely and contact the workshop about recovery. Follow the vehicle handbook. Tell us if the car cannot roll or is stuck in Park so suitable loading can be arranged.
A routine drain and refill is not the same as a full fluid exchange. The appropriate method depends on the gearbox, condition and manufacturer procedure. Do not assume a flush is included or suitable for every fault.
Transmission fluid is not interchangeable with engine oil. The right service begins with the installed gearbox and its requirements.
A hard gear change does not always mean damaged gears. Clutch release, hydraulic operation, cables or linkages can affect selection.
Grinding in a particular gear, bearing noise or a gearbox that jumps out of gear can lead to internal inspection. Where appropriate, a rebuild assesses gears, synchronisers, bearings and seals, replacing the parts that have failed or are outside specification.
The quote should explain whether gearbox removal, a clutch or flywheel, release components and oil are separate items. A clutch replacement is not automatically a gearbox overhaul.
For either manual or automatic internal work, compare the remaining condition of the unit with a replacement. Cooling-system contamination or damaged associated components must also be addressed where found, rather than fitting a repaired unit into an unresolved problem.
Mechanics offers free initial inspection, written quotes and car pickup across Dubai. Contact the Al Quoz team to confirm the visit and any extended diagnostic or transport charge.
Parts and replacement units. Check the actual part manufacturer or unit supplier, gearbox code, condition and included electronic setup. New, remanufactured and used units have different costs and histories. An OEM label alone does not establish compatibility.
Warranty terms. Ask for the cover attached to the agreed work, including parts and labour, duration or mileage, maintenance conditions, exclusions and the claim procedure. A parts supplier's cover does not automatically pay for removal and refitting.
Timing and final checks. Routine servicing is a smaller job than dismantling and rebuilding. Confirm parts availability and the estimated collection date. Handover should address leaks, relevant warnings, gear engagement and testing appropriate to the repair. Keep the invoice and service instructions.
We can prepare more effectively when the enquiry identifies the car and the behaviour.
Speak with Mechanics
An enquiry prepares the next step. The workshop confirms availability and the appointment.
Our workshop offers mechanical repairs and computer diagnostics as well as routine servicing. That helps when a shifting complaint also involves engine operation or an electrical fault.
Start with the free initial inspection, then discuss any further investigation, the finding and the repair options. Ask about pickup in Dubai if you cannot bring the car in. Check availability and charges before arranging transport.
“From the detailed explanation of repairs needed to the swift turnaround time, everything was handled impeccably.”
Fatima Al-Mansoori
Abu Dhabi · General service feedback
This feedback concerns the service experience. It is not presented as a documented gearbox repair.
The installed transmission matters more than the badge. These existing brand pages provide additional context; share your VIN to confirm the actual unit.
Practical answers about prices, repair choices and the workshop visit.
Published Dubai planning estimates, with 5% VAT added, are AED 262.50–630 for a fluid and filter service, AED 420–1,260 for a solenoid or sensor replacement, AED 2,100–5,775 for valve body or mechatronic repair and AED 5,250–12,600 for a rebuild. These are third-party advertised estimates, not Mechanics prices. The installed gearbox, fault and included work determine your quote. Specialist CVT, dual-clutch and luxury-car work may exceed these figures.
For most passenger-car enquiries, gearbox and transmission describe the same gear-changing unit. This page covers service, fault diagnosis, component repair, rebuild and replacement. A transfer case, drive shaft or differential is a separate part of the drivetrain and can need different work.
Not necessarily. The correct fluid service can address a maintenance need, but it cannot repair worn internal parts or an electrical fault. The checks should establish the fluid condition and level, stored faults and likely cause before a service is proposed as a remedy.
Sometimes. A serviceable control component, valve body or clutch-related fault can allow a targeted repair. Belt, chain, pulley, gear or casing damage may change the decision. The gearbox variant, extent of damage, available parts and repair warranty must be considered before choosing repair or replacement.
The workshop confirms timing after the required work and parts availability are known. A routine service normally needs less workshop time than removal and internal repairs. A rebuild involves dismantling, sourcing parts, reassembly and testing, so plan for several working days rather than a same-day promise. Ask for a completion estimate and any parts-ordering delay with your quote.
Ask Mechanics for the warranty terms attached to the chosen repair or replacement before approving it. Confirm the covered components and labour, time or mileage limit, servicing conditions, exclusions and how to report a fault. A used unit, a remanufactured unit and a repair can have different cover. No universal warranty duration is stated on this page.
Stop safely and arrange suitable recovery if drive is unreliable, the gearbox is overheating, fluid is leaking heavily or the car will not engage a gear. Follow the vehicle handbook and contact Mechanics before travelling. Tell the team if the car is stuck in Park or cannot roll so the transport arrangement suits it.
Tell us which car you drive, what has changed and whether it can be moved safely. We will help you arrange an inspection and a vehicle-specific repair quote.